LV. 16
GP 192

【心得】CBPC - CBP Physics with Collisions 及 BHUNP (含漢化)

樓主 銘言 jerrymean
GP43 BP-
含碰撞物理的CBP 物理系統
 

雖然已經在CBP那篇文章分享這個MOD訊息
不過我去看了CBP原作者的頁面
他已經釋出開發碼給上古社群,算是宣告了他極為可能不再維護CBP物理
(更正一下,CBP 的作者還是會針對遊戲版本的更新,更新 CBP 的版本號)
接著就有勇者自告奮勇接下這個工作大神跳出來優化了CBP的功能
而且將原有的慣性力的功能改良
增加了碰撞效果
有碰撞的功能除了原有的三處身體部位

還新增了
陽具陰部

根據這位新作者的自述
他用了精闢 (但是不太好理解) 的簡介
說明了 TBBP/BBP、CBP、CBPC、HDT 三者的區別:

"pregenerated physics animations" is TBBP/BBP

CBP uses simple physics for bounce only.

CBPC uses simple physics for bounce and collisions.

HDT uses full blown physics for bounce and collisions.

The main difference is CBPC is more performance friendly. And hopefully, easy to use

也因此,我把它作為一個新的MOD來分享,並新開一帖來介紹這個MOD
安裝方法很簡單,直接用MOD管理器安裝即可
不含esp, 不占插槽

只要有支援BBP、CBBP等 " 乳搖 + 臀搖 " 的服裝,均可以直接用在 CBP/CBPC 的物理系統中
部分支援HDT的服裝可以使用 (但是不保證都能用)
目前不支援頭髮物理運算以及裝備的物理運算

不過這一版,把CBP原作者新增的重力參數移除了
因此我原本在另一帖分享的參數也不太適用了

既然特地蓋樓了
就來分享目前調教以後適用的參數


需求:SKSE64、FINS SE、XPMSSE、含有物理效果的身型
適用版本:CBPC 1.0.3,SKSE 2.10
*本MOD不需要安裝CBP,可以直接取代為主要物理身形
適用身形:UNPB/ U系全家族 (UNPB以外可能需要微調)
設定體重:100  (100以外亦可使用,可能需要微調)
設定參數:本參數比較有果凍感微調過的更新版本請參考最新帖子回復
(以下可以直接照貼到CBPConfig.txt 檔案覆蓋)

# Linear spring stiffness
Breast.stiffness 0.05

# Quadratic Spring stiffness
Breast.stiffness2 0.04

# Velocity removed/tick 1.0 would be all velocity removed
Breast.damping 0.03

# Maximum number of units positio can diverge from target
Breast.maxoffset 6

# Time Quanta for the physics in ms 4 means that a 16ms frame would be broken down into 4 4ms steps
Breast.timetick 2.5

# Scale of the motion in X/Y/Z - Y is front to back, Z up and down and X side to side
Breast.linearX 0.45
Breast.linearY 0.3
Breast.linearZ 0.65

# Scale of the bones rotation around the X axis
Breast.rotational 0.05

Breast.timeStep 0.80

Butt.stiffness 0.03
Butt.stiffness2 0.01
Butt.damping 0.03
Butt.maxoffset 4
Butt.timetick 2.9
Butt.linearX 1.3
Butt.linearY 1.0
Butt.linearZ 0.9
Butt.rotational 0.05
Butt.timeStep 0.80

Belly.stiffness 0.04
Belly.stiffness2 0.01
Belly.damping 0.03
Belly.maxoffset 1.8
Belly.timetick 2.8
Belly.linearX 0.3
Belly.linearY 0.3
Belly.linearZ 0.4
Belly.rotational 0.02
Belly.timeStep 0.80

Tuning.rate 0


除了身體本身的物理行為之外
其實作者有針對 " 碰撞效果 " 用心地寫了一份教則
有興趣的人可以到N網自行下載拜讀
短期內我還無法研究那個部分
也歡迎大家分享

補充1:選配參數設定

補充2:支援 3BBB身型的 CBPC參數
漢化:
分享個人參數見本帖16樓20樓22樓

43
-
LV. 38
GP 819
2 樓 myps2 myps2
GP2 BP-
LL網作者提供的
for SKSE 2.0.6/2.0.8/2.0.9
加上N網提供的2.0.7

看了LL網討論 對話還真有趣...

2
-
LV. 16
GP 216
3 樓 銘言 jerrymean
GP17 BP-
這幾天花了些時間 觀摩紀錄片 微調參數
稍微分享一下成果

更新重點:
使胸部、臀部原本較輕浮的果凍感降低,增加重量感
增加胸部在垂直向的彈跳幅度與旋轉角度
現在乳房的彈跳效果更接近真實物理狀況了 (吧?)


需求:SKSE64、FINS SE、XPMSSE
不需要CBP Physics
適用版本:CBPC 1.0.3,SKSE 2.10
適用身形:UNPB/ U系全家族 (UNPB以外均可能需要微調)
設定體重:100  (100以外亦可使用,可能需要微調)
設定參數:(以下可以直接照貼到CBPConfig.txt 檔案覆蓋)

# Linear spring stiffness
Breast.stiffness 0.05

# Quadratic Spring stiffness
Breast.stiffness2 0.04

# Velocity removed/tick 1.0 would be all velocity removed
Breast.damping 0.037

# Maximum number of units positio can diverge from target
Breast.maxoffset 9

# Time Quanta for the physics in ms 4 means that a 16ms frame would be broken down into 4 4ms steps
Breast.timetick 2

# Scale of the motion in X/Y/Z - Y is front to back, Z up and down and X side to side
Breast.linearX 0.45
Breast.linearY 0.3
Breast.linearZ 0.65

# Scale of the bones rotation around the X axis
Breast.rotational 0.08

Breast.timeStep 0.35

Butt.stiffness 0.03
Butt.stiffness2 0.01
Butt.damping 0.03
Butt.maxoffset 4
Butt.timetick 2.9
Butt.linearX 1.3
Butt.linearY 1.0
Butt.linearZ 0.9
Butt.rotational 0.05
Butt.timeStep 0.7

Belly.stiffness 0.04
Belly.stiffness2 0.01
Belly.damping 0.03
Belly.maxoffset 1.8
Belly.timetick 2.8
Belly.linearX 0.3
Belly.linearY 0.3
Belly.linearZ 0.4
Belly.rotational 0.02
Belly.timeStep 0.8

Tuning.rate 0



Have fun ~
17
-
LV. 10
GP 1k
4 樓 J.P.Qlash JPQlash
GP0 BP-
即使不以碰撞為己任優先

" CBPC在整體物理效果的呈現上 也已大勝原先的CBP. "

(安裝更是平易近人 作者連後續的身形數值設定檔 都有統整進安裝程式.)

此文必須推 !
0
-
LV. 10
GP 1k
5 樓 J.P.Qlash JPQlash
GP5 BP-

檔案分享



包含所有種族 : 人族 精靈 虎人 亞龍人.

(身形為UNP Pinup 安裝CBPC時 還請選用相對應的參數.)
5
-
LV. 16
GP 239
7 樓 銘言 jerrymean
GP5 BP-
自推個文順便說一下更新訊息
作者有針對 SKSE64 2.0.11-2.0.12更新 dll檔
主要參數不需要更新
因此僅需要下載作者的更新版 dll檔
直接覆蓋/取代 CBPC SSE - Fomod installer - 2.0.10 MAIN FILE 中的 dll 檔即可
5
-
LV. 16
GP 247
8 樓 銘言 jerrymean
GP4 BP-
作者又更新了超強整合安裝版
將所有需求通通包到一包壓縮檔
使用者可以根據身型選擇自己需要的選項安裝
而且針對了SKSE64 各種版本都有支援,非常方便

除此之外,還針對了 尤莉安娜 預設的超巨大身型寫了一份特殊的支援文件
根據作者表示,這份文件可以自行添加、支援新的隨從,僅需要按照他的說明步驟
對於各種非傳統身型有癖好的可以去好好拜讀一下

不過我最主要是想要推薦新的MOD

其他作者編寫的各種參數檔
一樣是選配安裝
如果不喜歡我的設定參數、又懶得自己研究的
可以參考使用這位作者的設定值
波動程度/運動方式 根據使用者自己的選配項目決定

作者有分享試用後的影片
喜歡的記得去支持一下
4
-
LV. 16
GP 254
9 樓 銘言 jerrymean
GP10 BP-
前幾天作者又更新了一次檔案
改變如下:
Version 1.1.1
  • Added the ability to add empty nodes under [ConfigMap]
  • Added pelvis node to CBPCMasterConfig.txt. Note that every affected node must be added under [ConfigMap] in CBPCMasterConfig.txt to work.
  • Fixed a bug that caused ctd when logging is enabled.
另外
雖然我自己推薦了SINful CBPC Config
但是我自己試用過後卻不太喜歡XD
裡面有些選項的形容跟我實際體驗後的效果有不小落差
所以我還是自己改良了原本的參數
利用這幾天連假的時間參考了一些紀錄片資料
稍微改善了腹部+臀部的運動效果 (胸部的效果算是挺滿意的了因此沒有改)

changes:
降低臀部與腹部晃動的時間 (畢竟這兩處的脂肪會比胸部 " 結實 " 一點)
稍微增加臀部在垂直向的晃動幅度並略減低左右的晃動幅度


需求:SKSE64、FINS SE、XPMSSE、含有物理效果的身型
不需要CBP Physics
適用版本:CBPC 1.0.3~1.1.1,SKSE 2.10~2.12(僅需替換dll檔)
適用身形:UNPB/ U系全家族 (UNPB以外均可能需要微調)
設定體重:100  (100以外亦可使用,可能需要微調)
設定參數:(以下可以直接照貼到CBPConfig.txt 檔案覆蓋)

# Linear spring stiffness
Breast.stiffness 0.05

# Quadratic Spring stiffness
Breast.stiffness2 0.04

# Velocity removed/tick 1.0 would be all velocity removed
Breast.damping 0.037

# Maximum number of units positio can diverge from target
Breast.maxoffset 9

# Time Quanta for the physics in ms 4 means that a 16ms frame would be broken down into 4 4ms steps
Breast.timetick 2

# Scale of the motion in X/Y/Z - Y is front to back, Z up and down and X side to side
Breast.linearX 0.45
Breast.linearY 0.3
Breast.linearZ 0.65

# Scale of the bones rotation around the X axis
Breast.rotational 0.08

Breast.timeStep 0.35

Butt.stiffness 0.03
Butt.stiffness2 0.01
Butt.damping 0.03
Butt.maxoffset 4
Butt.timetick 1.4
Butt.linearX 1.2
Butt.linearY 0.9
Butt.linearZ 1.2
Butt.rotational 0.05
Butt.timeStep 0.7

Belly.stiffness 0.04
Belly.stiffness2 0.01
Belly.damping 0.03
Belly.maxoffset 1.8
Belly.timetick 1.2
Belly.linearX 0.3
Belly.linearY 0.3
Belly.linearZ 0.4
Belly.rotational 0.02
Belly.timeStep 0.80

Tuning.rate 0
10
-
LV. 12
GP 157
10 樓 不要說英文誰看得懂阿 tottoko
GP0 BP-
1/8新出的MOD

SINful CBPC MCM

可以讓你在MCM選單直接調整參數......

有參數強者要挑戰一下嗎
0
-
LV. 22
GP 341
11 樓 銘言 jerrymean
GP2 BP-
作者更新了一些小問題

直接照搬N網:

Version 1.1.5

  • Added option to CBPCMasterConfig.txt file to enable/disable Male Body Physics.
  • Fixed a bug that caused shaking on any affected node that's also defined as a collider (Was fixed for VR already in the previous version. Added to SSE version)
  • Added Papyrus functions to get version info. Requested by 3aq.

Version 1.1.4

  • Fixed a bug that caused left hand weapons to not have collisions in the VR version. Thanks to bobthedog007 for informing me about the bug. SSE version is not changed.

Version 1.1.3

  • VR Hands/Weapons Collision Fixed in VR version. SSE version is not changed.
2
-
LV. 22
GP 346
12 樓 銘言 jerrymean
GP3 BP-
推個文,告訴大家已經可以支援新版了...

什麼? 這樣會被當成惡意灌水刪文?
那就再多附一點作者更新說明來充實我的回文內容吧


Version 1.1.7


  • Added support for upcoming VRIK Inverse Kinematics 0.3. SSE version not changed.

Version 1.1.6


  • Added support for SSE version 1.5.73/SKSE64 2.0.14. It works with 2.0.15 too.
3
-
LV. 10
GP 1k
13 樓 J.P.Qlash JPQlash
GP10 BP-
在研讀完原作者那高深的PDF檔案後...

總而言之 :

如想要微調碰撞範圍跟程度  修改每一行的最後一組數值就對了.

但問題來了... 要改多少呢 ?

基於本人實在懶的有剩 連Nif檔都沒打開參考

採用直覺式修改法定勝負

依照身體部位之大小 :

大則 * 1/2 - 小則 * 3/4

沒想到...

意外的效果不錯 於是就在此分享 :

(至於肚子突起效果... 個人沒那麼重口 直接關掉處理.)



# This is Collision Config file for CBPC
#
# Designed to work with UNP Pinup
#
##############################################################################
# Extra Options
##############################################################################
[ExtraOptions]
BellyBulge=0.0     #This is the multiplier for the new special belly bulge for vagina penetration. Higher values would cause a bigger lump on the belly. 0 would disable this special setting.
BellyBulgePosition=-2.0  #This is the multiplier for the new special belly bulge for vagina penetration position. Negative values cause a lower position lump.
BellyBulgeMax=6.0        #This is the max value for clamping bellybulge amount
BellyBulgePosLowest=-12.0     #This is the lowest value for clamping belly bulge vertical position
BellyBulgeNodes=Genitals01   #These are the node names to match for belly bulge collision with pelvis node. You can add more than one separated with ","
##############################################################################
# Node Lists
##############################################################################

[PlayerNodes] #These are predefined, so adding wouldn't have any effect. But if you remove them, you won't get collision for that node.
LeftWandNode
RightWandNode

[AffectedNodes] #Define nodes here first, then set the collision spheres down
NPC L Breast
NPC R Breast
NPC L Butt
NPC R Butt
HDT Belly
NPC Pelvis [Pelv]

[ColliderNodes] #Define nodes here first, then set the collision spheres down
NPC L Hand [LHnd]
NPC R Hand [RHnd]
NPC L Finger02 [LF02]
NPC L Finger12 [LF12]
NPC L Finger22 [LF22]
NPC L Finger32 [LF32]
NPC L Finger42 [LF42]
NPC R Finger02 [RF02]
NPC R Finger12 [RF12]
NPC R Finger22 [RF22]
NPC R Finger32 [RF32]
NPC R Finger42 [RF42]
NPC Genitals01 [Gen01]
NPC Genitals02 [Gen02]
NPC Genitals04 [Gen04]
NPC Genitals06 [Gen06]
##############################################################################
# Collision spheres
#
# Multiple lines are supported.
# You can include 0 and 100 weight settings for npcs separating them with |
# Format is: x0,y0,z0,radius0 | x100,y100,z100,radius100
#
##############################################################################
# Affected Nodes

[NPC L Breast]
0.0,4.5,-2.0,1.5 | 0.0,5.5,-2.5,2.0

[NPC R Breast]
0.0,4.5,-2.0,1.5 | 0.0,5.5,-2.5,2.0

[NPC L Butt]
-2.0, 4.0,-3.0,2.45 | -2.5, 3.0,-3.0,2.5

[NPC R Butt]
2.0, 4.0,-3.0,2.45 | 2.5, 3.0,-3.0,2.5

[HDT Belly]
0,2.0,-1.0,1.15 | 0,2.0,-1.0,1.4

[NPC Pelvis [Pelv]] #For Female Genitals
0.0,0.0,-2.0,1.75 | 0.0,0.0,-2.0,1.75

##############################################################################

# Collider Nodes

[LeftWandNode]
0,-6.0,-2.0,2.25

[RightWandNode]
0,-6.0,-2.0,2.25

[NPC L Hand [LHnd]]
0,0,0,1.875 | 0,0,0,1.875

[NPC R Hand [RHnd]]
0,0,0,1.875 | 0,0,0,1.875

[NPC L Finger02 [LF02]]
0,0,0,1.5 | 0,0,0,1.5

[NPC L Finger12 [LF12]]
0,0,0,1.5 | 0,0,0,1.5

[NPC L Finger22 [LF22]]
0,0,0,1.5 | 0,0,0,1.5

[NPC L Finger32 [LF32]]
0,0,0,1.5 | 0,0,0,1.5

[NPC L Finger42 [LF42]]
0,0,0,1.5 | 0,0,0,1.5

[NPC R Finger02 [RF02]]
0,0,0,1.5 | 0,0,0,1.5

[NPC R Finger12 [RF12]]
0,0,0,1.5 | 0,0,0,1.5

[NPC R Finger22 [RF22]]
0,0,0,1.5 | 0,0,0,1.5

[NPC R Finger32 [RF32]]
0,0,0,1.5 | 0,0,0,1.5

[NPC R Finger42 [RF42]]
0,0,0,1.5 | 0,0,0,1.5

[NPC Genitals01 [Gen01]]
0,0,0,1.25 | 0,0,0,1.25

[NPC Genitals02 [Gen02]]
0,0,0,1 | 0,0,0,1

[NPC Genitals04 [Gen04]]
0,0,0,1 | 0,0,0,1

[NPC Genitals06 [Gen06]]
0,0,0,1.25 | 0,0,0,1.25



使用以上數值之大前提為...

1.女性使用 UNP - Pinup 身型

2.男性使用 SOS 身型 且生殖器大小設定正常

以下是個人 SOS 身型數值 : (RaceMenu - Gential)

Base - 1.1

1 Thickness - 1.15

1 Length - 1.5

2 Thickness - 1.15

3 Thickness - 1.15

4 Thickness - 1.15

5 Thickness - 1.15

6 Thickness - 1.25

其餘數值保持原樣.

(而基本晃動效果 沿用作者的原廠設定

並把肚子相關數值砍半 我就很滿足了.)
10
-
LV. 23
GP 465
14 樓 銘言 jerrymean
GP4 BP-
推個文順便提醒一下
CBPC 已經更新 1.1.9版本
支援最新版 SE 1.5.80/SKSE64 2.0.16

順便加一下 VR版的影片

4
-
LV. 24
GP 677
15 樓 銘言 jerrymean
GP5 BP-
好久沒來推這篇文了
由於 HDT-SMP 正式開源並發布到N網
加上3BBB的問世
許多原本只能使用 CBPC 的玩家紛紛轉投 HDT-SMP懷抱 (我也算半個XD)

不過主打簡約效能客群的CBPC並沒有因此就完全沒落
前陣子就有另一位大神,依據CBPC的架構,寫出了能在CBPC上使用 3BBB 身型的參數

這個新版本的 CBPC 參數我未來會再找時間研究並分享

而CBPC根據 3BBB的架構,也在今天發布了優化的更新 Version 1.3.5
如果沒有使用 3BBB身型的玩家可以直接沿用我之前的參數設定

近期更新內容如下:
Version 1.3.5
Fixed a very old bug that caused deformations when body/skeleton nodes with non-zero default positions are used (like 3BBB body).
Fixed the stretching issue caused by 1.3.4 update.
Version 1.3.3
Added CBPCSystem.ini config file which will hold the performance related settings. Removed those settings from CBPCMasterConfig.txt file. Other mod authors shouldn't have CBPCSystem.ini file in their mods.
Added UseParallelProcessing setting to CBPCSystem.ini. This setting is for users with fast, multiple core CPUs. It is set 0 by default which is off. If you want to use it, set it 1 or 2 (Explained in the config comments).
Fixed a bug that caused ctd when racemenu is opened with parallel processing on.
Some additional performance improvements.
Version 1.3.2
Made some performance improvements. In my tests I got approximately 30% performance increase. Your results may vary of course.
Fixed a bug that caused ctd when tuning.rate is enabled in the config.
Version 1.3.0
Removed cell restriction from the mod. It will now work on all actors in the high process.
Added ActorDistance to CBPCMasterConfig.txt. Default is 2048. Actors beyond this distance are ignored.
Added Haptic Feedback for VR hands collision. You can adjust it by HapticStrength and HapticFrequency parameters in CBPCMasterConfig.txt. Set HapticStrength=0 to disable haptic feedback.
Fixed a bug that caused VR hands collision not to work in some locations.
Changed Belly Bulge calculations to make it smoother. There is a new BellyBulgeReturnTime parameter in CBPCollisionConfig***.txt files. It's used to make the effect smoother.
Exposed VaginaOpeningMultiplier and VaginaOpeningLimit to CBPCollisionConfig***.txt config file.
Added MalePhysicsOnlyForExtraRaces parameter to CBPCMasterConfig.txt to make it easier to enable male creature races without having to enable it for all males. Set this 1 to enable male physics for ExtraRaces.
Actors are reset after Race Menu is closed now. So changing cells is no longer necessary after character modification.
Some performance improvements.
Version 1.2.0
Added support for SSE version 1.5.97/SKSE64 2.0.17. VR version is not changed.
5
-
LV. 24
GP 737
16 樓 銘言 jerrymean
GP5 BP-
大家好,新年快樂
更新一下BHUNP 的消息順便拉票
以及分享我微調的參數 (沒有圖片,因為會被ban,而且作者預設的參數已經優化的不錯了)
改變如下:
Version 1.55 (2020-01-26)
- Re-painted belly to look better(like UUNP Special Belly weight this time. I am satisfied with the belly weight so there won't be an update for it anymore.)
Version 1.54 (2020-01-23)
- Removed hands and feet slides and created new ones.(For some reason, hands kept following old UUNP slides(bsd files). I had to remove them and created from the scratch.)
- It means there will be no hands seams
- Removed the Vagina Ref in low-poly BHUNP index
Version 1.53 (2020-01-22)
- Repainted Belly weight to look better
- Fixed the issue that BBP body had no right breast weight
Version 1.52 (2020-01-20)
- Slightly repaint thighs to look better
- Edited a number of slides options to look better
Version 1.51 (2020-01-17)
- Fixed minor weight issue on pelvis part
- Added Breasts ref body for modders
Version 1.50 (2020-01-11)
- Re-polished the mesh shape for those who make extreme body shapes.
- Cleaned the topology flow
- Make all the slides more analogous with the old UUNP forms.(No more update about this matter.)
Version 1.41 (2019-12-27)
- Fixed the issue BHUNP had a very slight neck seam when the weight is 0.
- Widened the belly button of BHUNP Advanced bodies.
- Edited Feet and Hands slides to look more natural.
- Fixed several minor bugs.
- Removed collision meshes in the basic BHUNP body.

需求:SKSE64、FINS SE、XPMSSE、含有物理效果的身型
適用版本:CBPC 1.3.5以上,BHUNP 1.54 以上
適用身形:UNPB/ U系全家族 (UNPB以外均可能需要微調),BHUNP 安裝選項為C cup
設定體重:100  (100以外亦可使用,可能需要微調)
設定參數:(BHUNP僅包含胸部的三段骨骼參數以及腿部參數 但是不重要 ,其餘參數請直接沿用CBPC的參數即可。以下可以直接照貼到CBPConfig_3b.txt 檔案覆蓋)

# START ExtraBreast

ExtraBreast1.gravityBias 0.005
ExtraBreast2.gravityBias 0.001
ExtraBreast3.gravityBias 0.001

ExtraBreast1.gravityCorrection 0.3
ExtraBreast2.gravityCorrection 0.15
ExtraBreast3.gravityCorrection 0.01

# Linear spring stiffness 004
ExtraBreast1.stiffness 0.022
ExtraBreast2.stiffness 0.032
ExtraBreast3.stiffness 0.03

# Quadratic Spring stiffness 0001
ExtraBreast1.stiffness2 0.030
ExtraBreast2.stiffness2 0.042
ExtraBreast3.stiffness2 0.001

# Velocity removed/tick 1.0 would be all velocity removed 012
ExtraBreast1.damping 0.037
ExtraBreast2.damping 0.032
ExtraBreast3.damping 0.090

# Maximum number of units positio can diverge from target 64
ExtraBreast1.maxoffset 8
ExtraBreast2.maxoffset 12
ExtraBreast3.maxoffset 5

# Time Quanta for the physics in ms 4 means that a 16ms frame would be broken down into 4 4ms steps
ExtraBreast1.timetick 4
ExtraBreast2.timetick 6
ExtraBreast3.timetick 4

# Scale of the motion in X/Y/Z - Side, FrontnBack, UpnDown
ExtraBreast1.linearX 0.4
ExtraBreast1.linearY 0.25
ExtraBreast1.linearZ 0.6
ExtraBreast2.linearX 0.3
ExtraBreast2.linearY 0.22
ExtraBreast2.linearZ 0.4
ExtraBreast3.linearX 0.3
ExtraBreast3.linearY 0.10
ExtraBreast3.linearZ 0.12
# Scale of the bones rotation around the X axis
ExtraBreast1.rotational 0.045
ExtraBreast2.rotational 0.045
ExtraBreast3.rotational 0.025

ExtraBreast1.timeStep 0.43
ExtraBreast2.timeStep 0.60
ExtraBreast3.timeStep 0.5

# END
5
-
LV. 24
GP 752
17 樓 銘言 jerrymean
GP1 BP-
更新一下BHUNP 的消息順便拉票
更新內容如下:
Version 1.57
Minor weight edits
1
-
LV. 22
GP 15
18 樓 毛可可 ggc20142014
GP1 BP-
上浮!

更新優化了安裝介面,也支援了NPC的物理

Version 1.70
(2020-04-09)
- Added equippable smp items both for npcs and player(Thank you Acro(CBBE 3BBB))
- Removed unnecessary SMP Havok Path body types.
- Optimized bone hierarchy
- Updated CBPC settings

1
-
LV. 26
GP 793
19 樓 銘言 jerrymean
GP0 BP-
BHUNP 更新後 新增一個檔案 "BHUNP3BBB.esp", 但是需要前置檔案SexLab.esm
沒有使用實驗室的請先不要升級
0
-
LV. 26
GP 793
20 樓 銘言 jerrymean
GP10 BP-
各位防疫大使,大家好
更新一下BHUNP 的消息順便拉票
漢化版本為1.71,新增了MCM選單以及應用的快捷鍵/術法,可以針對個別NPC應用相關設定:

以及分享我微調的參數 (拜各路大神之賜,這次可以分享影片,不會被ban)
改變如下:
Version 1.71
(2020-04-11)
- Removed Sexlab.esm master plugin from BHUNP3BBB.esp
- Complete the Breast Ref(Uniboob)
Version 1.70
(2020-04-09)
- Added equippable smp items both for npcs and player(Thank you Acro(CBBE 3BBB))
- Removed unnecessary SMP Havok Path body types.
- Optimized bone hierarchy
- Updated CBPC settings
Version 1.65
(2020-03-27)
- Added a new bodyslide(Breast ref) reference for making bodyslides more delicately. - Still WIP on minor body types
- Bug fix: ygnord race is now functional.(LE custom race scripts are no more functional.)
- Added Reference Templates for BHUNP
- Added additional conversion body templates(7B Original, 7B Bombshell)
Version 1.60
(2020-02-23)
- Fixed some of missing sliders(like 7bunp) for the feet
- FIxed a minor issue with the hands
- Edited cbpc setting
Version 1.59
(2020-02-09)
- Tiny Minor weight edits
- Minor slides edits for better anus shapes.
Version 1.58
(2020-02-02)
- Minor weight edits for vagina
- Minor slides edits for better butt shapes
- Added missing xmls for hands and feet

需求:SKSE64, FINS SE, XPMSSE, BodySlide and Outfit Studio, HDT-SMP, 含有物理效果的身型
適用版本:CBPC 1.3.5以上,BHUNP 1.70 以上
適用身形:UNPB/ U系全家族 (UNPB以外均可能需要微調),BHUNP 安裝選項為 - C cup
設定體重:100  (100以外亦可使用,可能需要微調)
設定參數:(BHUNP僅包含胸部的三段骨骼參數以及腿部參數 但是不重要 ,其餘參數請直接沿用CBPC的參數即可。以下可以直接照貼到CBPConfig_3b.txt 檔案覆蓋)

# START ExtraBreast

ExtraBreast1.gravityBias 0.004
ExtraBreast2.gravityBias 0.002
ExtraBreast3.gravityBias 0.001

ExtraBreast1.gravityCorrection 0.35
ExtraBreast2.gravityCorrection 0.25
ExtraBreast3.gravityCorrection 0.01

# Linear spring stiffness 004
ExtraBreast1.stiffness 0.062
ExtraBreast2.stiffness 0.042
ExtraBreast3.stiffness 0.01

# Quadratic Spring stiffness 0001
ExtraBreast1.stiffness2 0.030
ExtraBreast2.stiffness2 0.042
ExtraBreast3.stiffness2 0.011

# Velocity removed/tick 1.0 would be all velocity removed 012
ExtraBreast1.damping 0.047
ExtraBreast2.damping 0.032
ExtraBreast3.damping 0.080

# Maximum number of units positio can diverge from target 64
ExtraBreast1.maxoffset 12
ExtraBreast2.maxoffset 11
ExtraBreast3.maxoffset 2

# Time Quanta for the physics in ms 4 means that a 16ms frame would be broken down into 4 4ms steps
ExtraBreast1.timetick 4
ExtraBreast2.timetick 6
ExtraBreast3.timetick 4

# Scale of the motion in X/Y/Z - Side, FrontnBack, UpnDown
ExtraBreast1.linearX 0.4
ExtraBreast1.linearY 0.25
ExtraBreast1.linearZ 0.7
ExtraBreast2.linearX 0.3
ExtraBreast2.linearY 0.22
ExtraBreast2.linearZ 0.5
ExtraBreast3.linearX 0.3
ExtraBreast3.linearY 0.10
ExtraBreast3.linearZ 0.12

# Scale of the bones rotation around the X axis
ExtraBreast1.rotational 0.045
ExtraBreast2.rotational 0.045
ExtraBreast3.rotational 0.025

ExtraBreast1.timeStep 0.43
ExtraBreast2.timeStep 0.60
ExtraBreast3.timeStep 0.5

# END

#Tuning.rate 60

物理參數效果如下,我們請 Tifa 來為我們示範
10
-
未登入的勇者,要加入 29 樓的討論嗎?
板務人員:

2941 筆精華,10/16 更新
一個月內新增 11
歡迎加入共同維護。


face基於日前微軟官方表示 Internet Explorer 不再支援新的網路標準,可能無法使用新的應用程式來呈現網站內容,在瀏覽器支援度及網站安全性的雙重考量下,為了讓巴友們有更好的使用體驗,巴哈姆特即將於 2019年9月2日 停止支援 Internet Explorer 瀏覽器的頁面呈現和功能。
屆時建議您使用下述瀏覽器來瀏覽巴哈姆特:
。Google Chrome(推薦)
。Mozilla Firefox
。Microsoft Edge(Windows10以上的作業系統版本才可使用)

face我們了解您不想看到廣告的心情⋯ 若您願意支持巴哈姆特永續經營,請將 gamer.com.tw 加入廣告阻擋工具的白名單中,謝謝 !【教學】